Ulysse Nardin has a watchmaking base in La Chaux-de-Fonds and Le Locle, with a 151-year history at the Lockwood plant (pictured). In cooperation with many years later, the Athens table in 2011 acquired the enamel face plate factory Donzé Cadrans, to obtain superb enamel mystery https://www.aomwatches.is/.
Ulysse Nardin in 2011 to buy enamel surface plate factory in the force of Locke Donzé Cadrans. Founded in 1972 by the enamel master Francis Donzé, the family-owned business has been working with Athens for many years before handing over its business. Donzé Cadrans is also a supplier of enamel for many other Swiss watch brands.
Production of enamel face plate First of all, the solid of the glaze block ground into powder, add water into the paint can only be applied after the metal face plate. As the guide passed through a glazed corridor to the room where the plate was burned, the unfinished face plate was placed next to the stove, approached to see the powder glazed over it. Into the furnace time of about 3 minutes, 790 to 830 degrees to be high temperature, a total of 3 to 5 times the powder and the firing process, printed on the time scale after firing to ensure that there will be no fade problem.
Firing is completed, polished in the center of the face plate to drill holes to place the pointer; Vice dial after the re-combination to be cut, highlighting a clear sense of hierarchy. And because of complex processes and full of technical mystery, making the enamel face plate to become another show the charm of the field, which is Donzé Cadrans's strengths.
No comments:
Post a Comment